Configure the FortiAnalyzer unit Administrative domains
FortiAnalyzer Version 3.0 MR3 Administration Guide
05-30003-0082-20060925 43
To disconnect an administrator, select a check box next to the administrator name
and selecting Disconnect.
Administrative domains
Administrative Domains (ADOMs) enable the FortiAnalyzer administrator to
create and manage access for multiple domains, and can comprise multiple
devices on a single device. The admin administrator can configure administrative
profiles to grant administrators access to specific log data, reports, alerts, and
options and menus in the web-based manager.
Each ADOM is independent of other domains in the system. When the
FortiAnalyzer administrator assigns customers separate and unique ADOMs,
administrators or users on each ADOM will not be aware of other devices or
ADOMs on the FortiAnalyzer unit.
Similar to the web-based manager, users who access the CLI for their ADOM are
not able to see data or configuration settings for other ADOMs.
Enabling administrative domains
Using the default admin account, you can enable multiple ADOM operation on the
FortiAnalyzer unit.
To enable administrative domains
1 Go to System > Admin > Settings.
2 Select Admin Domain Configuration.
3 Select OK.
The FortiAnalyzer logs you out. You can now log in again as admin. When you log
in as admin with Admin Domain Configuration enabled, you see the Administrative
Domain Configuration page.
The default domain is the Global Configuration, which grants access to all
devices, data and reports on the FortiAnalyzer unit. You must enable
administrative domains to configure access privileges for ADOMs.
Figure 10: The Administrative Domain Configuration page
Note: Administrative Domains are not available on the FortiAnalyzer-100 or
FortiAnalyzer-100A/100B.
To Next Page
Loading...
Need help?
General