FortiAnalyzer Version 3.0 MR3 Administration Guide
46 05-30003-0082-20060925
Network sharing Configure the FortiAnalyzer unit
Adding users
Create user accounts to give users access to the log, reports and hard disk
storage of the FortiAnalyzer unit. Users added will not have administrative access
to the FortiAnalyzer hard disk or FortiAnalyzer unit. To add administrative users
see “Administrator settings” on page 39.
To add a user account
1 Go to System > Network Sharing > User.
2 Select Create New.
3 Enter the following information for the user account and select OK:
Adding groups
Create user groups to maintain directory access to a large number of users at
once.
To add a user group
1 Go to System > Network Sharing > Group.
2 Select Create New.
3 Enter the following information for the group account:
4 Select the users from the Available Users area and select the Right arrow to add
them to the group.
To remove a user, select a user from the Members area and select the Left arrow.
5 Select OK.
Configuring Windows shares
Configure the FortiAnalyzer unit to provide folder and file sharing using Windows
sharing. To view users with Windows share access to the FortiAnalyzer unit, go to
System > Network Sharing > Windows Share.
User name Enter a user name. For example, twhite. The name cannot include
spaces.
UID (NFS only) Enter a user ID.
Use this field only if you are using the NFS protocol. The NFS protocol
uses the UID to determine the permissions on files and folders.
Password Enter a password for the user.
Description Enter a description of the user. For example, the users name or a position
such as IT Manager.
Group Enter a user name. For example, Finance. The name cannot include
spaces.
GID (NFS only) Enter a Group ID. Use this field if you are using Network File System.
To Next Page
Loading...