FortiAnalyzer Version 3.0 MR3 Administration Guide
42 05-30003-0082-20060925
Administrator settings Configure the FortiAnalyzer unit
RADIUS Server
Add RADIUS servers to the FortiAnalyzer unit for administrator authorization.
To add a RADIUS server
1 Go to System > Admin > RADIUS Servers.
2 Select Create New.
3 Configure the following and select OK:
Administrator Settings
Administrator settings enable you to configure the idle time when the
FortiAnalyzer unit logs out an administrator, the language for the web-based
manager and to enable administrative domains.
To configure administrators, go to System > Admin.
Figure 9: Administrators settings
Monitor
The Monitor page enables the admin account to view other administrators
currently logged in to the FortiAnalyzer unit. The admin account can disconnect
other administrators, should the need arise.
To monitor current administrators go to System > Admin > Monitor.
Name Enter a name to identify the server.
Server IP/Name Enter the IP address for the server.
Shared Secret Enter the password for the server.
Note: Only the “admin” user can add or change administrator account information.
Idle Timeout Set the idle timeout to control the amount of inactive time before
the administrator must log in again. To improve security keep the
idle timeout to a low value, for example five minutes.
Web Administration
Language
Set the language for the web-based manager.
Admin Domain
Configuration
Select to enable administrative domains (ADOMs). For more
information on ADOMs, see “Administrative domains” on page 43.
If you want to disable the ADOM feature, you must first delete all
ADOM entries from the FortiAnalyzer unit. Until you do this, the
Admin Domain Configuration option will not appear in this window.
Note that the Admin Domain Configuration option is not available
on the FortiAnalyzer-100 or FortiAnalyzer-100A/100B.
To Next Page
Loading...
Need help?
General