Fortinet FortiAnalyzer-100A - Configuring the FortiAnalyzer unit

Installing the FortiAnalyzer unit Configuring the FortiAnalyzer unit
FortiAnalyzer Version 3.0 MR3 Administration Guide
05-30003-0082-20060925 21
Configuring the FortiAnalyzer unit
Use the web-based manager or the Command Line Interface (CLI) to configure the
FortiAnalyzer unit IP address, netmask, DNS server IP address, and default gateway IP
address.
Table 1: FortiAnalyzer-100A and FortiAnalyzer-100B factory defaults
Administrator
account
User name: admin
Password: (none)
Port 1
IP: 192.168.1.99
Netmask: 255.255.255.0
Management Access: HTTP, HTTPS, PING, SSH
Port 2
IP: 192.168.2.99
Netmask: 255.255.255.0
Management Access: HTTP, HTTPS, PING, SSH
Port 3
IP: 192.168.3.99
Netmask: 255.255.255.0
Management Access: HTTP, HTTPS, PING, SSH
Port 4
IP: 192.168.4.99
Netmask: 255.255.255.0
Management Access: HTTP, HTTPS, PING, SSH
Table 2: FortiAnalyzer-400 factory defaults
Administrator
account
User name: admin
Password: (none)
Port 1
IP: 192.168.1.99
Netmask: 255.255.255.0
Management Access: HTTP, HTTPS, PING, SSH
Port 2
IP: 192.168.2.99
Netmask: 255.255.255.0
Management Access: HTTP, HTTPS, PING, SSH
Port 3
IP: 192.168.3.99
Netmask: 255.255.255.0
Management Access: HTTP, HTTPS, PING, SSH