FortiAnalyzer Version 3.0 MR3 Administration Guide
40 05-30003-0082-20060925
Administrator settings Configure the FortiAnalyzer unit
Changing the administrator password
The “admin” administrator and administrators with read and write permissions can
change their administrator account passwords. Administrators with read only
permissions must get their passwords changed by the “admin” administrator.
To change the administrator account password
1 Go to System > Admin > Administrators.
2 Select the Change Password Icon in the Action column.
3 Enter the old password for confirmation.
4 Enter the new password and confirm it by entering it again.
5 Select OK.
Access Profile
An Access Profile is the group of access rights assigned to an administrator. You
can create any number of access profiles that you assign to administrators. For
each profile, you can define what access privileges are granted. For example, you
can have a profile where the administrator only has read and write access to the
reports, or assign read-only access to the content archive logs. Only one access
profile can by assigned to any given administrator.
User information Enter the administrator name, email and other contact
information.
Trusted Host Enter the IP address where the administrator can log into the
FortiAnalyzer unit.
If you want the administrator to be able to access the
FortiAnalyzer unit from any address, use the IP address 0.0.0.0
and netmask 0.0.0.0. To limit the administrator to only access the
FortiAnalyzer unit from a specific network, enter that network’s IP
and netmask.
Access Profile Select an access profile from the list. You define the administrative
access permissions and save them as access profiles. For more
information, see “Access Profile” on page 40.
To Next Page
Loading...