Reports Browsing reports
FortiAnalyzer Version 3.0 MR3 Administration Guide
05-30003-0082-20060925 127
Browsing reports
Use the FortiAnalyzer web-based manager to view a list of the generated reports.
To view generated reports, go to Report > Browse.
Figure 62: Browse generated reports
Email from Enter an email address for the FortiAnalyzer unit or administrator
requesting the report.
Email server Select the email server to use when the FortiAnalyzer unit sends
the reports as an email attachment.
Email to Enter the email addresses of the recipients of the report. Add
multiple recipients by pressing Enter after each email address.
The addresses appear in the Email list box.
Upload Report to FTP
Server
Select to upload completed report files to an FTP server.
Server type Select the type of uploading server. Select from:
• File Transfer Protocol (FTP)
• Secure File Transfer Protocol (SFTP)
• Secure Copy Protocol (SCP)
IP address Enter the IP address of the FTP server.
Username Enter the user name to log onto the FTP server.
Password Enter the password to log onto the FTP server.
Directory Enter the directory on the FTP server where the FortiAnalyzer unit
saves the report files.
Upload report(s) in
gzipped format
Select to compress the report files as gzip files before uploading
to the FTP server.
Delete file(s) after
uploading
Select to delete the report files from the FortiAnalyzer hard disk
once the FortiAnalyzer unit completes the upload to the FTP
server.
Refresh Select to refresh the list. If the FortiAnalyzer unit is in the process
of generating a report, use Refresh to update the status of the
report generation.
Delete Select the reports from the listing by selecting the check box next
to the report name.
Device Type Select the reports based on the type of device included in the
report.
To Next Page
Loading...