Configure the FortiAnalyzer unit Network sharing
FortiAnalyzer Version 3.0 MR3 Administration Guide
05-30003-0082-20060925 45
Creating a new ADOM
Creating a new ADOM will enable the FortiAnalyzer administrator to configure
access privileges for a group of administrators and users.
To create a new ADOM
1 Select Main Menu.
2 Select Create New.
3 Enter a name for the new ADOM.
4 Select OK.
Adding a device to an ADOM
An ADOM can include multiple devices. Users of an ADOM can access
information such as logs and alerts, and change configurations for devices on
their ADOM according to their access profile.
To add a device to an ADOM
1 Go to Device > All > Device.
2 Select Edit for the device you want to add to the ADOM.
3 Select the Administrative Domain.
Network sharing
Users can save, store and access information on the FortiAnalyzer hard disk as
an alternate means of storing important files and work. Users can also access the
reports and logs saved on the FortiAnalyzer hard disk.
Use network sharing to configure users and user access to the FortiAnalyzer
folders and files on its hard disk and set file properties.
When users connect to the FortiAnalyzer unit, consider the following:
• Microsoft Windows users connect to the FortiAnalyzer hard disk by mapping a
drive letter to a network folder.
• For Macintosh users, enable the FortiAnalyzer Windows networking selection.
Macintosh users can use the SMB sharing protocol to connect to the
FortiAnalyzer unit.
• UNIX or Linux users:
• mount the FortiAnalyzer hard disk as smbfs if you are using Windows
Networking.
• mount the FortiAnalyzer hard disk as nfs if you select Network File System.
Before a user can access files on the FortiAnalyzer hard disk, create user and
group accounts and set their access permissions.
To Next Page
Loading...
Need help?
General