Fortinet FortiAnalyzer-100A User Manual

Devices Adding FortiClient installations
FortiAnalyzer Version 3.0 MR3 Administration Guide
05-30003-0082-20060925 71
To add an HA cluster
1 Go to Device > All
2 Select Unregistered from the Show list, and select Add from the Action column.
or
Select Add Device.
3 Configure the same settings as indicated in the section “Adding a FortiGate unit”
on page 68, using the information for the primary unit, with the following
exceptions:
• Set the Mode to HA.
• Enter the device IDs (serial numbers) for each subordinate unit in the cluster
and select Add.
Adding FortiClient installations
The FortiAnalyzer unit can store FortiClient log messages for reporting purposes.
Unlike logging FortiGate units, you configure the FortiAnalyzer unit to accept all
FortiClient log messages, rather than individual users. To obtain network histories
for individual users, use the FortiAnalyzer reporting features.
To register a FortiClient installation to send log messages to the
FortiAnalyzer unit
1 Go to Device > All.
2 Select Unregistered from the Show list, and select Add from the Action column.
or
Select Add Device.
3 Set the following options and select OK.
Unlike other devices, a FortiClient connection can only send log messages to the
FortiAnalyzer unit. You cannot configure it so that a user can view their log
messages or specific reports.
Device Type Select FortiClient from the device list. It is selected by default
when selecting a FortiClient installation from the unregistered list.
Device Name The default selection is for all FortiClients.
Description by default, the description indicates that the FortiClient selection is
for all connected FortiClient installations.
Administrative
Domain
Select the administrative domain (ADOM) that the device will be
associated with. This selection is visible when using the ADOM
feature. For more information on ADOMs, see “Administrator
settings” on page 39.
Allocated Disk Space
(MB)
Set the allocated amount of the FortiAnalyzer hard disk to log and
content messages for the device. The amount allocated will also
include disk space set aside for quarantined files. For details on
quarantine file disk allocation, see “Configuring quarantine
settings” on page 95.
A disk space setting of zero is unlimited.
When Allocated Disk
Space is All Used
Select what the FortiAnalyzer unit should do when the allocated
disk space has been reached. Select either overwriting older files
or stop logging.

Fortinet FortiAnalyzer-100A Specifications

General

Brand	Fortinet
Model	FortiAnalyzer-100A
Category	Measuring Instruments
Language	English