Reports Browsing reports
FortiAnalyzer Version 3.0 MR3 Administration Guide
05-30003-0082-20060925 129
For details on report customization within the FortiGate unit, see the Log&Report
chapter in the FortiGate Administrators Guide.
Report types
There are two types of the report that you can browse and view:
• Roll up report
• Individual reports
Roll up report
The roll up report contains all reports that you selected for the FortiAnalyzer unit to
generate and presents it as a roll up report with all individual reports included.
To view a roll up report
1 Go to Report > Browse and select a report name.
2 Select a report category to expand the list of report sub-categories. Selecting a
report name in the left frame displays the report in the right frame.
Roll up reports are only available in HTML format.
Individual reports
Individual reports have the same look and functionality as the roll up reports when
viewing the HTML file format. When you view the report in one of the alternate
formats, only the right frame with the report information is included.
To view individual reports
1 Go to Report > Browse.
2 Select the blue arrow for a report name to view the individual reports.
3 Select the report you want to view in HTML format, or select a file format in the
Other Formats column.
Event activity codes
The report for the Event Activity includes a table column called Event Code.
These codes are the log message ID numbers from the FortiGate unit. The log
message ID is a ten digit number. The first two digits (01) represent the log type,
and is an event log in this case. The following two digits represent the subtype
(see Table 15 on page 129). The remaining five digits are the message ID. For
details see the FortiGate Log Message Reference.
Table 15: FortiGate 2.8 log subtypes
Subtype
number
Subtype
00 system – System activity event
01 ipsec – IPSec negotiation event
02 dhcp – DHCP service event
03 ppp – L2TP/PPTP/PPPoE service event
04 admin – admin event
05 ha – HA activity event
To Next Page
Loading...