91
13 SETUP MENU
GLOBAL SETTINGS: OUT 1, OUT 2, OUT 3 EQ PAGES
Each of the main output pairs passes through its own global equalizer, with the option for Graphic, Parametric,
or disabled (p. 89). Each EQ also features a master LEVEL adjustment control. Use the global EQs to make
adjustments to the tone or level of ALL presets. This is convenient when you need to compensate for using a
different amp or speakers, or if a particular performance space is overly bright or boomy. The master LEVEL fader
should be used with care as it can cause clipping or sub-optimal signal-to-noise ratio. The EQs affect ONLY the
Analog outputs.
Global EQ settings apply to all instances of the analog signal, including the balanced jacks, unbalanced jacks, and
headphones jack, but NOT signals routed to USB or digital outs.
GLOBAL SETTINGS: CUSTOM SCALES PAGE
The Scales page is used to congure scales for the Custom Shifter type in the Pitch block.
See "The Fractal Audio Blocks Guide" for more on this effect.
PARAMETER Description
Custom Scale Number
1–32
Selects from among the 32 global custom scales available to edit using the 12
parameters which follow.
___ SHIFT (+/- 24) These 12 parameters are used to set the shift amount for each of the 12 steps
of the chromatic scale. Range is +/-24 semitones (+/- two octaves). To set up
a custom scale, select its number in the eld above and then set each of the
12 pitch values as desired. Changes take effect immediately, with no need to
STORE. Soft-buttons provide options to reset a selected value or all values in
the current scale to the default value of +/- 0 semitones.
To Next Page
Loading...
