EasyManua.ls Logo

Fronius FPA 3020 Orbital - Safety Inspection; Disposal; Safety Markings; Data Security

Fronius FPA 3020 Orbital
115 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
Safety inspection
Disposal
Safety markings
Data security
Copyright
The owner/operator is obliged to have a safety inspection performed on the machine at
least once every 12 months.
The manufacturer also recommend the same (12-month) interval for regular calibration of
power sources.
A safety inspection, by a trained and certied electrician, is prescribed:
- after any alterations
- after any modications or installations of additional components
- following repairs, care and maintenance
- at least every twelve months.
Observe the relevant national and international standards and directives in connection
with the safety inspection.
More detailed information on safety inspections and calibration is available from your
regional or national service centre, who will be pleased to provide you with copies of the
necessary documents upon request.
Do not dispose of this device with normal domestic waste!
To comply with the European Directive 2012/19/EC on Waste Electrical and Electronic
Equipment and its implementation as national law, electrical equipment that has reached
the end of its life must be collected separately and returned to an approved recycling
facility Any device that you no longer require must be returned to our agent, or nd out
about the approved collec- tion and recycling facilities in your area.
Ignoring this European Directive may have potentially adverse affects on the environ-
ment and your health!
Equipment with CE-markings fulls the basic requirements of the Low- Voltage and
Electromagnetic Compatibility Guideline (e.g. relevant product standards according
to EN 60 974).
Equipment marked with the CSA-Test Mark fulls the requirements made in the relevant
standards for Canada and the USA.
The user is responsible for the data security of changes made to factory settings. The
manufacturer is not liable, if personal settings are deleted.
Copyright to this instruction manual remains the property of the manufacturer.
The text and illustrations are all technically correct at the time of going to print. The right
to effect modications is reserved. The contents of the in- struction manual shall not
provide the basis for any claims whatever on the part of the purchaser. If you have any
suggestions for improvement, or can point out to us any mistakes which you may have
found in the manual, we should be most grateful for your comments.

Table of Contents

Related product manuals