Fronius FPA 3020 Orbital - Selecting the Type of Manual Welding Torch

60
1. For gas-cooled welding torches, call
up the „GAS M. TORCH“ entry
2. For water-cooled welding torches,
select the „WATER M. TORCH“
entry
3. IMPORTANT! For gas-cooled or
water- cooled welding torches,
- Gas-cooled:
standard setting for coolant
pump is “OFF”.
- Water-cooled:
standard setting for coolant
pump is “AUTO”.
4. Use the „BACK“ button to select the orbital welding guns
or
Use „Menu“ to go back to the main menu
Selecting the
type of manual
welding torch