58
Selection window
(1)
(2)
(3)
(5)
(6)
(4)
The selection window offers the following menus:
(1) Parameter settings
(2) Setup and system parameters
(3) Synergic (characteristic)
(4) Weld
(5) Orbital welding gun/manual welding torch
IMPORTANT! If a TIG welding torch has been selected instead of the orbital
welding gun, the following symbol appears (4) as follows:
(6) Entry shows the currently selected orbital welding gun or manual torch.
A detailed description of the menus is provided in the following sections.
To Next Page
Loading...
