Fronius FPA 3020 Orbital - Changing Password

64
2. If required, press the „RESET USER“ (4) button to reset the settings to their
original status
3. Use the „Op.-“ and „Op. +“ (5) buttons to call up the settings for others users
4. Use the „BACK“ button to go back to the „Change Operator“ window
5. In the „Change Operator“ window, use the „>>“ button to call up the user-specic
settings window
User permissions
(continued)
1. Touch the button (1) to change the
password.
2. You are requested to enter the new
password. Touch the into the eld
(2) to open a keypad for entering for
entering the new password.
(2)
Changing
password
(1)