88
If errors can not be acknowledged, switch the system off and on again.
Explanation of error see Error List Servo.
Error list servo
(a) (b) (c)
To deactivate further error-related
alarms:
1. Touch the touchscreen. A symbol
bar appears (a)
2. Use the arrow keys (b) to select the
alarm concerned
3. Select the padlock symbol in the
symbol bar (c)
4. The alarm concerned is greyed out
To reactivate the alarm,
5. select it again using the arrow keys (b)
6. touch the „padlock symbol“ (c). The alarm is reactivated, and again presented in
black font.
Alarms and error
messages
(continued)
To Next Page
Loading...
