145
EN
The 3D image oscillates
Cause: There is another Virtual Welding system in the immediate vicinity
Remedy: Increase the distance from the other Virtual Welding system to at least 4 me-
tres
Cause: There are objects that emit radiation (mobile telephones etc.) in the immedi-
ate vicinity of the Virtual Welding system
Remedy: Remove objects that emit radiation from the immediate vicinity of the Virtual
Welding system
Cause: There are metallic objects in the immediate vicinity of the Virtual Welding sys-
tem
Remedy: Remove metallic objects from the immediate vicinity of the Virtual Welding
system
The 3D image on the screen is wrong
The movement of the welding torch or electrode holder and/or welding helmet is not dis-
played, 3D image on the screen is uncoordinated
Cause: The welding torch or electrode holder is not connected
Remedy: Connect the welding torch or electrode holder
Cause: The welding helmet is not connected
Remedy: Connect the welding helmet
Cause: The workpiece holder is not connected
Remedy: Connect the workpiece holder
Cause: A sensor cable or sensor connector is faulty
(cable kinked, missing or broken pin in the connector)
Remedy: Change the sensor cable
Cause: The workpiece is not properly engaged in the workpiece holder
Remedy: Engage the workpiece properly in the workpiece holder
The VR glasses are not working
Cause: The VR glasses are not plugged in or were not plugged in before the Virtual
Welding system was switched on
Remedy: Plug in the VR glasses before switching on the Virtual Welding system
NOTE!
Plug in the USB and VGA / DVI, depending on the model of the glasses.
Cause: The VR glasses are disabled
Remedy: Enable the VR glasses in terminal management, under "Other settings"
Cause: The VR glasses are faulty
Remedy: Replace the VR glasses
To Next Page
Loading...
