14
Basic Operation
2-2 Changing SV (Set value)
[Description] –––––––––––––––––––––––––––––––––––––––––––––––––––––––
The SV is a target value for control.
SV must be within the range between
[
SV-L] (lower limit) and [SV-H] (upper limit) which belong to Pid
parameter.
Related parameters:
SV (Set value) lower limiter [SV-L], SV (Set value) upper limiter [SV-H] (see page 58)
[Setting example] Changing the SV from 250°C to 1195°C –––––––––––––––––––
Display Operating procedure
1.
1. Check that the PV/SV display is shown.
2.
Press , or keys to change SV to “1195”.
The change become effective immediately.
To Next Page
Loading...
