Fuji Electric Micro-Controller X Socket type - [Stat] Status Display of Ramp Soak (054)

51
2nd block parameter
StAt
Status display of ramp soak (054)
[Description] –––––––––––––––––––––––––––––––––––––––––––––––––––––––
Displays the progress of the ramp soak.
The ramp soak statuses are indicated as follows.
Display
Status
oFF
Ramp soak is stopped
1-RP
Step 1 ramp
1-St
Step 1 soak
2-RP
Step 2 ramp
2-St
Step 2 soak
⁞
⁞
8-RP
Step 8 ramp
8-St
Step 8 soak
ENd
Ramp soak is nished
[Setting example] Checking ramp soak progress ––––––––––––––––––––––––––
Display Operating procedure
1.
Press and hold the key for about three seconds during the SV/PV display.

appears.
2.
Press the key to display .

Ramp soak progress is displayed.
3.
Press the key.

The screen returns to the SV/PV display.