Fuji Electric Micro-Controller X Socket type - Page 28

26
Parameter functions and setting procedure
[Setting example] Running Auto-tuning –––––––––––––––––––––––––––––––––
Display Operating procedure
1.
Press and hold the key for about one second during the SV/PV display.

appears.
2.
Press the key to display .
3.
Press the key.

The setpoint starts blinking.
4.
Press the or keys to change “ oFF ” to “ oN .”
5.
Press the key or wait for three seconds to save the change.

The normal auto-tuning starts.
6.
Press the key.

The screen returns to the SV/PV display.