Fuji Electric Micro-Controller X Socket type User Manual

54
Parameter functions and setting procedure
[Setting example] Setting SV1, ramp time, and soak time for step1 –––––––––––
Display Operating procedure
1.
Press and hold the key for about three seconds during the SV/PV display.

appears.
2.
Press the key to display .
3.
Press the key.

The setpoint starts blinking.
4.
Press the , or keys to change “ 0 ” to “ 50 .”
5.
Press the key or wait for three seconds to save the change.
6.
Press the key to display .
7.
Press the key.

The setpoint starts blinking.
8.
Press the , or keys to change “ 00.00 ” to “ 00.10 .”
9.
Press the key or wait for three seconds to save the change.
10.
Press the key to display .
11.
Press the key.

The setpoint starts blinking.
12.
Press the , or keys to change “ 00.00 ” to “ 00.05 .”
13.
Press the key or wait for three seconds to save the change.
14.
Press the key.

The screen returns to the SV/PV display.

Fuji Electric Micro-Controller X Socket type Specifications

General

Brand	Fuji Electric
Model	Micro-Controller X Socket type
Category	Temperature Controller
Language	English