146
6 Changing the Machine Settings
[Adjust Color Registration]
Correct the Color Regi when the color is not accurate in the print results.
Important
Do not run Color Regi correction several times, because this may affect the performance of this machine.
[Tray 5 Guide Adjustment]
Adjust the detection sensitivity of the paper guide width of Tray 5 (Bypass).
[Reset]
[Reset IPsec and 802.1X Settings]
Turn off [IPsec Settings] and [IEEE 802.1X Settings] of[Connectivity & Network Setup] > [Security Settings] and
initialize settings.
[Delete Fonts, Forms and Macros]
Erase all downloaded font data, form data, and macro data on this machine.
[Restore Factory Default Values]
Return all settings of this machine to their factory defaults.
To Next Page
Loading...
