EasyManua.ls Logo

Fuji Xerox ApeosPort Print C5570

Fuji Xerox ApeosPort Print C5570
290 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
259
11.2 Printable area
11.2 Printable area
Standard print area
Area excluding the margins (4.1 mm) from the top, bottom, left, and right edges of the paper.
Extended print area
Print after extending the print area.
However, there may be unprintable sections up to the edges of the paper depending on the limits of this machine.
Important
This machine cannot print in the area less than 4.0 mm from the edges of the paper. In addition, the maximum printable
area of this machine during printing is (W) 305.0 mm × (L) 476.6 mm. (With a long-length size, the area is (W) 305.0 mm
× (L) 1194.0 mm.) Printing cannot exceed this area.
Refer
For more information about configuring the print driver, refer to the print driver help. For information about
configuration by the control panel, refer to "[Print Area]" (P.117).

Table of Contents

Related product manuals