177
8.1 Replacing Consumables
1. Make sure that the device is not operating, and open the front cover.
2. Slowly pull out the Waste Toner Container “R5” while grasping the handle.
3. Insert the new waste toner container while holding its handle, and push the container in until it clicks.
4. Close the front cover.
5. Insert the used waste toner container into the supplied plastic bag and then seal it firmly with the zipper.
6. Carefully place the old waste toner container into the empty box with both hands.
7. Clean the LED printheads.
Refer
For information on how to clean the LED printheads, refer to "Cleaning the Interior (LED Printheads)" (P.205).
To Next Page
Loading...
