239
10.3 Installing the Envelope Tray
1. Pull out the envelope tray until it stops.
2. Lift the front of envelope tray slightly and remove the envelope tray from the machine.
When removing the envelope tray, lift up the back side high, while lifting the front side slightly.
3. Move the materials stored within the cover on the front right of the tray from the Envelope Tray to Tray 1.
4. Insert Tray 1 into the slot and push the tray in gently.
Refer
For information on how to load paper in Tray 1, refer to "Loading Paper into Trays 1 to 4 (3 and 4 are Optional)" (P.48).
5. Tap the display area of authentication information at the top left of the Home screen, and then login as a
machine administrator.
To Next Page
Loading...
