43
3.4 Paper
Important
Load coated paper one sheet at a time. If you use the machine with multiple sheets loaded at the same time, they may
stick together due to moisture, enter the machine, and cause a malfunction.
Note
In the case of a size or type for which automatic two-sided printing is not possible, set paper that has been printed once
(limited to one-sided printing by this machine) in Tray 5 (Bypass), and then print on the opposite side manually. At this
time, open the printer driver and configure the paper type to [xxx Reloaded]. Note that it is not necessary to change to a
paper type for back side use in the case of bond, plain, and recycled paper.
The only paper type that may be configured for long size paper is [LW Card (106 - 176gsm)].
If you project transparencies printed in color using a reflection-type projector, the image may appear dark. Using a high-
resolution projector may solve the problem.
[Coated 3B Reloaded (257 -
300gsm)]
--- --
[Envelope] - - - --
[Postcard] --
[Custom Type 1]
[Custom Type 2]
[Custom Type 3]
[Custom Type 4]
[Custom Type 5]
[Other]
[Pre-Printed]
[Letterhead]
[Heavy 1A (106 - 135gsm)]
[Heavy 1B (136 - 157gsm)]
[Heavy 1C (158 - 176gsm)]
[Heavy 1S (106 - 176gsm)]
[Heavy 1A Reloaded (106 - 135gsm)] -
[Heavy 1B Reloaded (136 - 157gsm)] -
[Heavy 1C Reloaded (158 - 176gsm)] -
[Heavy 1S Reloaded (106 - 176gsm)] -
[Heavy 2A (177 - 220gsm)]
[Heavy 2S (177 - 220gsm)]
[Heavy 2A Reloaded (177 - 220gsm)] -
[Heavy 2S Reloaded (177 - 220gsm)] -
Paper Type
Tray 1
and 2
Tray 3
and 4
((Tandem
Tray
Module)
(optional)
)
Tray 3
and 4 ((2
Tray
Module)
(optional)
)
Tray 5
(Bypass)
Tray 6
(HCF (A4
1 Tray)
(option))
Auto 2-
sided
To Next Page
Loading...
Need help?
General
