5.9 Adjusting Gradation
177
Maintenance
5
To print the gradation adjustment chart for Resolution Preferred, select <Text> in step (6) of the flow-
chart.
How to get the setting value
Get the value in [Lighter/Darker] by comparing the printed gradation adjustment
chart and "Color sample for gradation adjustment" included with the printer.
Find the density that is close to density of the color sample from 7 offset patches
and their intermediates of the gradation adjustment chart. You can select the
value from 13 levels in the range from -6 to +6.
Also, refer to the steps described on the gradation adjustment color sample.
The default values are all 0.
ure
1
Fold the printed gradation adjustment chart along the vertical guide
(dotted line) for the desired color, as shown in the diagram.
2
Adjust the part of the chart with desired density to the part of the color
sample with the same position.
For adjustment of low density (L), adjust Low to Low.
C
Cyan
CL
Margin Margin Margin Margin
M
Magenta
ML
Fold Fold Fold
Y
Yellow
YL
K
Black
KL
Process Gray
To Next Page
Loading...
Need help?
General
