ure
1
While pushing up the release lever (1),
slowly open cover L4 (2).
2
If the leading edge of the paper is invis-
ible or cannot be held with hands when
cover L4 is opened, pull it out straight in
the direction of the arrow.
3
If the paper does not reach the fuser
unit (fuser cartridge), remove it by pull-
ing the paper straight in the direction of
the arrows with both hands.
Do not try to pull the paper from the bypass tray side.
Unfused toner may be on a roller, staining the paper
that is loaded next.
Never touch a labeled area found on or
near the fuser. You can get burnt. If a
sheet of paper is wrapped around the
heat roller, do not try to remove it by
yourself to avoid injuries or burns.
Switch off the machine immediately,
and contact our Customer Support
Center.
(1)
(2)
To Next Page
Loading...
