6.2 Clearing Paper Jams
204
Troubleshooting
6
6
Pull the paper drawn out in step 5 with
both hands in the direction of the arrow.
Do not try to pull the paper from the bypass tray side.
Unfused toner may be on a roller, staining the paper
that is loaded next.
7
If the leading edge of the paper
appears on the center tray side, pull the
paper with both hands straight in the
direction of the arrows until the leading
edge appears.
8
Pull out the paper drawn out in step 7
straight upward (in the direction of the
arrows) with both hands.
●
The paper may be felt slightly heavy when it is pulled
out.
●
Unless the paper is pulled straight in the direction of
the arrows, the paper may be torn to leave in the
printer, causing another trouble.
Never touch a labeled area found on or
near the fuser. You can get burnt. If a
sheet of paper is wrapped around the
heat roller, do not try to remove it by
yourself to avoid injuries or burns.
Switch off the machine immediately,
and contact our Customer Support
Center.
To Next Page
Loading...
Need help?
General
