6.5 List of Messages
233
Troubleshooting
6
All data
Ejecting...Tray*
Status: The print data that remains in this printer is being ejected.
Print data cannot be received from the computer.
Empty Center Output Tray Cause: The center output tray is filled with paper.
Action: Unload paper from the center output tray.
“3.1 Main Components and Their Functions”(P.30)
Clear Ctr Tray Open & Close F Cause: A paper jam has occurred at the center output tray ejection
port.
Action: Remove the jammed paper.
“6.2.8 Paper Jams in the Finisher”(P.205)
Storing image...
**** Tray*
Status: Secure print jobs are being spooled.
Print data can be received from the computer.
Cancelling...
**** Tray*
Status: Data during printing is discarded.
Print data can be received from the computer.
Check Bypass Cause: The paper loaded in tray 5 (bypass) is incorrect.
Action: Load tray 5 (bypass) with paper of which the size/direction is
xxxx and type is XXXX.
“5.4 Loading Paper”(P.115)
Check Bypass Press Set
xxxxxxxx
Cause: Your print instruction specified [Bypass-wait user].
Action: Load paper tray 5 (bypass tray) with paper of size and orien-
tation xxxx and type XXXX or check that this paper is loaded
in tray 5 (bypass tray). Then press the <Eject/Set> button on
the control panel. Printing will start.
“5.4 Loading Paper”(P.115)
Waiting for data
xxxx
Status: The printer is waiting for print data.
Print data can be received from the computer.
Please reboot printer Cause: Some error occurred.
Action: Switch the printer off and on again after the display on the
control panel is off. If the same message appears again, write
down [***-***]. Switch the power off and unplug the power
cord after the display on the control panel is off, and contact
our Customer Support Center or your dealer.
Message Cause/action
To Next Page
Loading...
Need help?
General
