Fujitsu FLASHWAVE 7500 - Connector Cable Description Number; Installing Modem Cable (Main Optical Shelf Backplane)

CHAPTER 3
Small Configuration
Installing Cables
FNC-7500-0061-200
Issue 1, May 2009
FLASHWAVE 7500 Release 6.1
Equipment Installation
3-110
Fujitsu and Fujitsu Customer Use Only
3.19.4 Installing Modem Cable (Main Optical Shelf Backplane)
This procedure provides instructions for installing the 25-pin, D-sub modem cable and
installing it on the Main Optical shelf backplane. Table 3-10 [p. 3-110] lists pertinent
information for this cable. Figure 3-84 [p. 3-110] shows the cable connector pinouts.
Note: The modem cable is a standard RS-232 straight-through (not null-modem) cable
available at most computer supply stores.
Table 3-10: Modem Cable Information
(Small Configuration)
Cable Part
Number
Backplane
Connector
Number
Cable Description
Connector
Type
Cable Wire
Size
21-176-xxx
a
a
xxx = length in feet
CN43 Modem access to remote NE 25-pin D-sub 24 AWG
Figure 3-84: Connector Pinouts, 25-Pin D-Sub Modem Cable















 

 



 

 


 



Revision 1, June 2009