Fujitsu FLASHWAVE 7500 - Installing LAN Cable (Optical;Tributary Shelf ); Installing LAN Cable (Optical;Tributary Shelf)

CHAPTER 3
Small Configuration
Installing Cables
FNC-7500-0061-200
Issue 1, May 2009
FLASHWAVE 7500 Release 6.1
Equipment Installation
3-118
Fujitsu and Fujitsu Customer Use Only
3.19.8 Installing LAN Cable (Optical/Tributary Shelf)
This procedure provides instructions for connecting to the LAN ports on the
Optical/Tributary shelf backplane. Table 3-14 [p. 3-118] lists pertinent information for these
cables. Figure 3-89 [p. 3-118] shows the cable connector pinouts.
Step Task
1 Connect the RJ-45 connector on one end of the LAN cable (21-332-xxx) to the primary
Tributary shelf or Auxiliary Optical shelf backplane connector CN1.
Table 3-14: LAN Cable Information (Small Configuration)
Cable Part
Number
Backplane Connector
Number
Cable
Description
Connector
Type
Cable Wire
Size
21-332-xxx
a
a
xxx = length in feet
For the Optical shelf:
CN2
CN6
LAN
connection
RJ-45 24 AWG
For Tributary shelves:
CN1
CN3
Figure 3-89: Connector Pinouts, LAN Cable
1
2
3
4
5
6
7
8
TXP
TXN
RXP
RXN
m1714au_1
Revision 1, June 2009