CHAPTER 4
ETSI Configuration
Installing Fans, Rack Covers, and End Panels
4-43
FLASHWAVE 7500 Release 6.1
Equipment Installation
Fujitsu and Fujitsu Customer Use Only
FNC-7500-0061-200
Issue 1, May 2009
4.12.2 Installing Rack Covers
This procedure provides installation instructions for the three optional covers used to prevent
the accidental removal of cards and fiber at select sites (see Figure 4-25 [p. 4-43]).
Figure 4-25: FLASHWAVE 7500 Optional Covers on Rack (Front View)
(ETSI Configuration)
r1417_1
FLASHWAVE 7500
SH-02
FLASHWAVE 7500
SH-01
Upper Cover
Middle Cover
Lower Cover
Product Label
Rack Configuration
Part Number
To Next Page
Loading...