CHAPTER 2
Core Configuration
Installing Cables
FNC-7500-0061-200
Issue 1, May 2009
FLASHWAVE 7500 Release 6.1
Equipment Installation
2-62
Fujitsu and Fujitsu Customer Use Only
2.13.4 Installing Modem Cable (Main Optical Shelf Backplane)
This procedure provides instructions for installing the 25-pin, D-sub modem cable on the
Main Optical shelf backplane. Table 2-3 [p. 2-62] lists pertinent information for this cable.
Figure 2-34 [p. 2-62] shows the cable connector pinouts.
Note: The modem cable is a standard RS-232 straight-through (not null-modem) cable
available at most computer supply stores.
Table 2-3: Modem Cable Information
(Core Configuration)
Cable Part
Number
Backplane
Connector
Number
Cable Description
Connector
Type
Cable Wire
Size
21-176-xxx
a
a
xxx = length in feet
CN43 Modem access to remote NE 25-pin D-sub 24 AWG
Figure 2-34: Connector Pinouts, 25-Pin D-Sub Modem Cable
To Next Page
Loading...