CHAPTER 2
Core Configuration
Installing Cables
2-63
FLASHWAVE 7500 Release 6.1
Equipment Installation
Fujitsu and Fujitsu Customer Use Only
FNC-7500-0061-200
Issue 1, May 2009
1 Connect the modem cable to connector CN43 (Main Optical shelf), and secure it with
retaining screws. See Figure 2-33 [p. 2-61].
2 Connect the other end of the modem cable to the appropriate external modem.
Note: To connect a PC directly to connector CN43, use a null-modem cable in place of the 21-176-xxx
cable.
This procedure is complete.
To Next Page
Loading...