Fujitsu FLASHWAVE 7500 - Installing the ETSI DCM (SFD6) Shelf

CHAPTER 4
ETSI Configuration
Installing the ETSI DCM (SFD6) Shelf
FNC-7500-0061-200
Issue 1, May 2009
FLASHWAVE 7500 Release 6.1
Equipment Installation
4-30
Fujitsu and Fujitsu Customer Use Only
4.10 Installing the ETSI DCM (SFD6) Shelf
The ETSI DCM (SFD6) shelf used in ILA applications, if needed, provides dispersion
compensation for dense wavelength division multiplexing (DWDM) signals entering the NE.
The SFD6 DCM shelf (FC9682SFD6, Figure 4-14 [p. 4-31]) can be installed in an ETSI
rack (see Figure 4-15 [p. 4-32]). The ETSI mounting flange kit for the DCM shelf
(FC9682FLGD) is used.
Revision 1, June 2009