CHAPTER 4
ETSI Configuration
Installing the Optical/Tributary Shelf
FNC-7500-0061-200
Issue 1, May 2009
FLASHWAVE 7500 Release 6.1
Equipment Installation
4-28
Fujitsu and Fujitsu Customer Use Only
Install the Optical/Tributary shelf as follows:
1 If not already done, remove the shelf from the shipping container.
2 Install the Optical/Tributary shelf in the ETSI rack. Secure the shelf to the rack using five rack
mounting screws on each side of the shelf.
This procedure is complete.
Figure 4-12: Tributary Shelf—Populated with Plug-In Units (ETSI Configuration)
To Next Page
Loading...