CHAPTER 5
Extension Configuration
Installing Cables
5-53
FLASHWAVE 7500 Release 6.1
Equipment Installation
Fujitsu and Fujitsu Customer Use Only
FNC-7500-0061-200
Issue 1, May 2009
1 Connect the HK1 input housekeeping cable to backplane connector CN41 (Extension shelf)
and secure it in place using retaining screws. See Figure 5-22 [p. 5-49].
Note: The far end of 21-626-xxx is not terminated with a connector.
Figure 5-25: Connector Pinouts, HK2 Cable
To Next Page
Loading...