Important
FLASHWAVE 7500 Release 6.1
Equipment Installation
Fujitsu and Fujitsu Customer Use Only
FNC-7500-0061-200
Issue 1, May 2009
IMPORTANT
Observe all warnings in the text or on equipment labels regarding high-voltage or high-temperature conditions.
The following warnings and figures apply to most Fujitsu products.
Plug-In Unit Cautions
Observe the following precautions when handling plug-in units:
■
Hold the plug-in unit only by its edges.
■
Slowly and firmly push a plug-in unit into its slot to avoid damaging the unit. Do not force the unit. A
slow insertion method minimizes power surges during installation. The longer ground connector pins
ensure the ground circuit is connected first.
ESD Cautions
Fiber Warnings Avertissements de Fibre
Units are stamped with anti-electrostatic markings (shown at
right). Observe the following precautions to avoid damage from
electrostatic discharge (ESD):
■
Always transport and store the unit in an ESD approved
shipping bag.
■
Always wear an ESD wrist strap, with a minimum 1-megohm
resistance, that is connected to safety ground. Do not use a
damaged wrist strap.
Danger: Never handle exposed fiber with your bare
hands or touch it to your body. Fiber fragments can
enter the skin and are difficult to detect and remove.
La Danger: Jamais la poignée a exposé la fibre avec vos
mains nues ou le touche à votre corps. Les fragments de
fibre peut entrer la peau et sont difficiles de détecter et
enlever.
Anti-Electrostatic Markings
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
SENSITIVE
DEVICE
To Next Page
Loading...
