CHAPTER 2
Core Configuration
Installing Power, Ground, and Alarm Cables
FNC-7500-0061-200
Issue 1, May 2009
FLASHWAVE 7500 Release 6.1
Equipment Installation
2-42
Fujitsu and Fujitsu Customer Use Only
Note: The HA15B-0001-B361 CBP has dual-post output power connectors.
Table 2-2: Association of Shelves to Circuit Breakers
(Core Configuration)
Circuit
Breaker
Rack Configuration
Rack with One
Universal Shelf
(Figure 2-22 [p. 2-39])
Rack with Two
Universal Shelves
(Figure 2-23 [p. 2-40])
Rack with Three
Universal Shelves
(Figure 2-24 [p. 2-41])
Shelf Name Shelf Name Shelf Name
CB1 SHU3-1 SHU3-1 SHU3-1
CB2 n/a SHU3-2 SHU3-2
CB3 n/a n/a SHU3-3
Figure 2-25: Circuit Breaker Panel Rear View (HA15B-0001-B361)
To Next Page
Loading...