184
Chapter 7 Configuring Hardware and Utilities
The [Main] menu screen may not appear although the [F2] key is pressed. In this case, press
the [Ctrl] + [Alt] + [Delete] keys simultaneously and restart the server, then start the BIOS
Setup.
If you press the [F12] key while the message "<F2> BIOS Setup / <F12> Boot Menu" is dis-
played on the screen, the Boot menu screen will appear after the POST completes.
Key operations in the BIOS Setup Utility
The roles of the keys used for BIOS Setup Utility settings are as follows:
table: List of key operations on the BIOS Setup Utility screen
Key Description
[F1] Switches the detailed information display on and off.
[Esc] When the submenu screen is displayed, the submenu closes and the screen returns
to the previous menu. When the menu screen is displayed, this utility closes.
[↑] [↓] Scrolls through the menu option list.
[←] [→] Switches between menus.
[-] [+] Changes the value of an item.
[Enter]
Selects an item. For items where is displayed, a submenu appears.
[F9] Resets each item to the default value. (The default value may vary from the value
set at the time of purchase.)
[F7] Resets an item to its previous value.
Boot Menu
1. CD-ROM Drive
2. +Diskette
3. +Hard Drive
4. Legacy LAN Card
< > Select <Enter> Confirm
To Next Page
Loading...
