185
PRIMERGY RX300 S4 User's Guide
How to exit the BIOS Setup Utility
1 Use the [←] [→] keys to display the [Exit] menu.
2 Use the [↑] [↓] keys to select the exit mode.
To save configuration changes before exiting:
Move the cursor to [Save Changes & Exit] and press the [Enter] key.
The message "Save configuration changes and exit now?" is displayed.
To exit without saving configuration changes:
Move the cursor to [Discard Changes & Exit] and press the [Enter] key.
The message "Configuration has not been saved! Save before exiting?" is displayed.
3 Use the [←] [→] keys to move the cursor to [Yes] or [No], and press the [Enter]
key.
If you selected [Save Changes & Exit]:
Select [Yes] to exit.
After saving the changed settings, the BIOS Setup Utility closes and the server restarts.
Select [No] not to exit.
The display returns to the BIOS Setup Utility window.
If you selected [Discard Changes & Exit]:
Select [Yes] to save changes before exit.
The BIOS Setup Utility closes and the server restarts.
Select [No] when not saving the settings.
The BIOS Setup Utility closes and the OS starts.
PhoenixBIOS Setup Utility
Item Specific Help
Select Item
Select Menu
Change Values
Execute Command
-/+
Enter
Advanced Security Server ExitMain
Save Changes & Exit
Discard Changes & Exit
Get Default Values
Load Previous Values
To Next Page
Loading...
