ScanSnap Manager Icon and Operations (for Mac OS Users)
189
ScanSnap Manager Icon and Operations
All operations on the ScanSnap are managed in ScanSnap Manager.
Ordinarily, the [ScanSnap Manager] icon is added to the Dock. The icon appears auto-
matically in the Dock when Mac OS starts.
The icon also indicates whether ScanSnap Manager is successfully communicating with the
ScanSnap or not. The appearance of the icon changes according to the status of communica-
tion, as shown below.
Clicking and holding this icon shows menus which you can use to start scanning, change
scanning settings, and check the status of consumables.
Communication Status Icon in the Dock
Communication is active
Communication is not active
To Next Page
Loading...
