Cleaning Materials
325
Cleaning Materials
To obtain these parts, contact your FUJITSU dealer or an authorized FUJITSU scanner ser-
vice provider.
*1 : It may take a long time before the cleaner vaporizes if a large quantity is used. When cleaning
the ScanSnap parts, moisten a cloth with modest quantities of the cleaner. In addition, wipe off
the cleaner completely with a soft lint-free cloth to leave no residue on the surface of the
cleaned parts.
*2 : Pre-moistened with Cleaner F1, cleaning wipes are used instead of moistened cloths.
*3 : Any lint-free cloth can be used.
Cleaning Materials Parts No. Unit Remarks
Cleaner F1 (*1) PA03950-0352 1 bottle Size: 100 ml
Cleaning Wipe (*2) PA03950-0419 1 pack Contains 24 sheets
Lint-free dry cloth (*3) Commercially
available
——
PFU LIMITED
To Next Page
Loading...
Need help?
General