Cleaning the ScanSnap Exterior
326
Cleaning the ScanSnap Exterior
Clean the ScanSnap exterior and the stacker with a dry cloth or cloth moistened with a small
amount of Cleaner F1 or any neutral detergent.
• Never use paint thinner or other organic solvents.
• During the cleaning, prevent water or moisture from getting inside the ScanSnap.
• It may take a long time before the cleaner vaporizes if a large quantity is used. When clean-
ing the ScanSnap parts, moisten a cloth with modest quantities of the cleaner. In addition,
wipe off the cleaner completely with a soft lint-free cloth to leave no residue on the surface of
the cleaned parts.
Neutral detergent or
Cleaner F1
Cloth
Thinner
To Next Page
Loading...
