Fujitsu S1500M - ScanSnap - Document Scanner - Disconnecting; Finishing Scansnap Operation

How to Perform a Scan (for Windows Users)
63
■ Finishing ScanSnap Operation
Exiting ScanSnap Manager
Select [Exit] from the Right-Click Menu.
In most cases, ScanSnap Manager does not need to be exited.
Disconnecting the ScanSnap
1. Close the ADF paper chute (cover) to turn off the ScanSnap.
⇒ The [ScanSnap Manager] icon on the taskbar changes from to .
2. Disconnect the USB cable from your computer.
3. Disconnect the power cable from the AC outlet.
You can no longer use the ScanSnap after exiting ScanSnap Manager.
Select the [Start] menu → [All Programs] → [ScanSnap Manager] → [ScanSnap
Manager] to start up ScanSnap Manager.
The ScanSnap is turned on/off in conjunction with the computer or opening/closing of the
ADF paper chute (cover). Ordinarily, you can forget about turning on/off the ScanSnap
being connected to the computer.