How to Perform a Scan (for Mac OS Users)
200
3. Clear the [Use Quick Menu] checkbox.
4. Select a profile to be executed after scanning.
Select a profile using either of the following:
• [Profile] pop-up menu in the ScanSnap setup window
• [Profile] menu
5. Load the document into the ScanSnap.
For details about how to load a document into the ScanSnap, refer to "Loading Docu-
ments" (page 28).
When the [Use Quick Menu] checkbox is selected, an action to be executed after scan-
ning and an interacting application cannot be specified.
Refer to "Using the Quick Menu" (page 194) to select an action from the Quick Menu after
documents are scanned.
To Next Page
Loading...
