Setting the ScanSnap (for Mac OS Users)
205
• [Paper] tab
− Size of a document to be scanned
([Paper size] and [Carrier Sheet Settings])
− Whether to detect multifeed
• [Compression] tab
− File size of scanned image data (compression rate)
4. Click the [Apply] button.
⇒
Scanning settings are changed.
Settings for scanning vary depending on the scanning method
For details about items that can be set, refer to "Setting Items With/Without Quick Menu"
(page 361).
If the [Scan] button on the ScanSnap is pressed while the ScanSnap setup window is dis-
played, the window is closed and scanning is started. In this case the contents being set
are saved, and used for scanning.
However, if the [Scan] button on the ScanSnap is pressed while windows other than the
ScanSnap setup window are displayed, scanning will not start.
To Next Page
Loading...
