Home screen
Menu screen
Menu-2
Menu-1
Mixing menu
Steering mixing
Warning display
If the power switch is
turned on while the
engine cut switch is on,
an audible alarm will be
heard. Immediately set
the engine cut switch to
OFF.
Steering brake ON/OFF is indi-
cated on the home screen for a
few seconds.
Setting
- Tap (ON) / (OFF).
101
Function
Steering Mixing
This mixing function uses 2 servos to individually control the left and right steering. Left
and right steering can be set independently so smooth cornering is possible. By using the
"
Steering mixing
"
function, the motions of the servos on the left and right sides of the steer-
ing can be adjusted at the same time. The right side steering servo or the left side steering
servo connects to receiver channel 1 and the other side connects to receiver auxiliary chan-
nels. The channel to which the left and right servo connects is not speci ed. After the left
and right servos are adjusted individually, Ackerman can also be adjusted by
"
Ackerman
"
rate. In addition, the left and right steering are operated in the opposite direction by switch.
An
"
Brake
"
function by steering can also be set.
Steering Mixing
The mixing function is assigned to auxiliary channels used by other mixing cannot be
used. When the number of channels is insuf cient, cancel the other mixing.
1
(Function ON/OFF)
Tap "Mixing" (ON) or (OFF) to select ON /
OFF.
"OFF" :Mixing function OFF
"ON" :Mixing function ON
Steering mixing adjustment
To Next Page
Loading...
