Non-telemetry LED (telemetry OFF sign)
When the telemetry function is inhibited by
race regulations, a special LED lights when
the telemetry function is OFF to con rm that
the telemetry function is not operating.
Caution
Position the antenna verti-
cally to the ground.
Handling the antenna and card slot and receiver
About The Transmitter Antenna
Position the antenna vertically to the ground.
In other positions the operating range may be reduced.
The antenna cannot be removed.
The antenna is not removable. It will be damaged if an attempt is made to remove it.
Please do not grasp the transmitter's antenna while driving.
Doing so may degrade the quality of the RF transmission to the model.
The antenna position can be changed in the direction as shown in fi gure. However, please do not
apply unnecessary force or shock.
The internal cable may be damaged; thus transmitting distance decreases and it may cause malfunction.
There might be a small glitch when the antenna of the transmitter is brought close to ser-
vos, ESCs or other peripheral devices.
This is not an issue but please keep this symptom in mind, especially when setting-up.
Non-telemetry LED
(Lit when telemetry function is OFF)
Antenna
A B
Antenna Moving Range
27
Before Using
To Next Page
Loading...
