FUTABA 7XC - Optional Parts; When Requesting Repair

When requesting repair
Before requesting repairs, please recheck your system to see if the problem persists. If so, read the fol-
lowing for service.
(Information needed for repair)
Describe the problem in as much detail as possible and send the letter along with the system in ques-
tion.
- Symptom (Including the conditions and when the problem occurred)
- R/C System (Send transmitter, receiver and servos)
- Model (Type of model, brand name and model number or kit name)
- Detailed packing list (Make a list of all items sent in for repair)
- Your name, address and telephone number.
(Warranty)
Read the Warranty card.
- When requesting warranty service, send the card or some type of dated proof purchase.
Optional Parts
The following parts are available as T7XC options. Purchase them to match your application. For other
optional parts, refer to our catalog or web site. www.futabarc.com.
Transmitter Battery
When purchasing a transmitter battery use the following:
Part name
HT5F1800B (6V/1800mAh) Ni-MH battery
FT2F1700B(6.6V/1700mAh)/2100BV2 (6.6V/2100mAh) Li-Fe battery
Please do not use the transmitter batteries HT5F1800B and FT2F1700/2100BV2 as a receiver battery.
Telemetry sensors
Usable sensor options (As of May 2018)
Voltage Sensor (SBS-01V) / Temperature sensor (SBS-01T) / Temperature sensor (SBS-01TE)
RPM Sensor (SBS-01RM) / Brushless type RPM Sensor (SBS-01RB) / Current sensor (SBS-01C)
GPS sensor (SBS-01G) Speed and Distance
©Copyright 2018. No part of this manual may be reproduced in any form without prior permission. The contents of this manual are subject to
change without prior notice. While this manual has been carefully written, there may be inadvertent errors or omissions. Please contact our
service center if you feel that any corrections or clarifications should be made.
FUTABA CORPORATION
oak kandakajicho 8F 3-4 Kandakajicho, Chiyoda-ku, Tokyo 101-0045, Japan
TEL: +81-3-4316-4820, FAX: +81-3-4316-4823
©FUTABA CORPORATION 2018, 05 (1)
• No part of this manual may be reproduced in any form without prior permission.
• The contents of this manual are subject to change without prior notice.
• This manual has been carefully written. Please write to Futaba if you feel that any corrections or clarications should be
made.
• Futaba is not responsible for the use of this product.